Lab Type ABC Coex Film Machine

Extruder LE8-30/C

• Conical screw diameter: 18 mm at inlet feed, 8 mm at end

• Screw L/D ratio: 30

• Servo Motor: 400 W

• Screw speed range (round per minute): 0 to 300 RPM

• Number of barrel heating zone: 1

• Heating power: 650 W

• Max pellet size (cylindrical): 3 x 3 mm

Film Tower LUMLF-150

• Maximum film lay flat width: 100 mm

• Film speed (per minute): 0.5 – 5 m/min

• Standard film die diameter: 28 mm (gap 1.5 mm)

• Height from die to nip-roll: 705 mm

• Die heater power: 1350 W

• Variable speed air ring blower power: 400 W

• Air compressor power (Film Bubble): 1/8 HP 94W

• Pressure range of compressor: 0 to 4 bar

• Resin remaining in screw: 12.97 g

• Resin remaining in die and adaptor: 8.66 g

• Total resin remaining in screw and die: 21.68 g

• Minimum quantity to blow a film: 50 to 70 g

Two-Station Windup

• Maximum film lay flat width: 100 mm

• Film speed (round per minute): 0.5 – 5 m/min

• Total electrical power: 30 W

Complete film line

• Dimensions (W x L x H): 1005 x 1330 x 1625

• Voltage: 3 phase 400 V, 50 Hz, N, PE

• Total power and ampere: 6.0 kW, 25.7 A